HP FTAM/9000 Reference Manual Download Page 73

Page: 73 / 102

Chapter 3

Diagnostic error_ids

inout_dcb->diagnostic->error_id

3004

MESSAGE

F_NON_EXISTENT_FILE

CAUSE

The shadow file for the filename specified on
ft_select() does not exist.

ACTION

Remove the existing FTAM data file and recreate it
using FTAM functions; doing so recreates the
shadow file.

3005

MESSAGE

F_FILE_ALREADY_EXISTS

CAUSE

You called ft_create() with file_status set to
FT_NEW, and a file by that same name already
exists in the filestore.

ACTION

Call ft_create() with a different filename.

3007

MESSAGE

F_CANNOT_DELETE_FILE

CAUSE

On an ft_select(), ft_create(), or ft_fopen() function,
you selected a file without setting the
FT_FA_DELETE_FILE bit in the requested_access
field.

ACTION

Set FT_FA_DELETE_FILE to ON (1) and call the
function again.

Summary of Contents for FTAM/9000






































































































Search results

Summary of Contents for FTAM/9000

Reviews:

Related manuals for FTAM/9000

Brands by name

Popular brands

HP FTAM/9000, Reference Manual

Search results

Summary of Contents for FTAM/9000

Reviews:

Related manuals for FTAM/9000

Brands by name

Popular brands