HP FTAM/9000 Reference Manual Download Page 19

Page: 19 / 102

Chapter 1

FTAM return_codes

inout_dcb->result.return_code

MESSAGE

FTE017_CONTEXT_NAME_MISSING

CAUSE

The context_name is missing. EXAMPLE: You called
ft_connect() with a 0 (zero) in the
input_dcb->context_name.length field.

ACTION

Call the function with the following FTAM
context_name: 1 0 8571 1 1.

MESSAGE

FTE018_CALLED_DIR_NAME_NO_ADDR

CAUSE

On ft_connect(), the called_dir_name for the FTAM
responder has no associated presentation address.
Either called_dir_name is not configured on your
network, or you incorrectly typed the name.

ACTION

Call ft_connect() with a configured called_dir_name
that identifies the FTAM responder to which you are
trying to connect.

MESSAGE

FTE019_CONNECT_EXHAUSTED

CAUSE

You reached the maximum number of allowable
connections between ftam_init and the responder.

ACTION

You have three options.

• Activate another ftam_init and call ft_connect()

again.

• Finish processing on some of the open connections

and re-use those connections.

• Finish processing on some of the open connections,

call ft_rrequest() or ft_abort() to release or abort the
connection, and call ft_connect() again.

Summary of Contents for FTAM/9000






































































































Search results

Summary of Contents for FTAM/9000

Reviews:

Related manuals for FTAM/9000

Brands by name

Popular brands

HP FTAM/9000, Reference Manual

Search results

Summary of Contents for FTAM/9000

Reviews:

Related manuals for FTAM/9000

Brands by name

Popular brands