47
Flashing yellow (3 Hz)
The port is sending or receiving data at 40 Gbps.
Off
No transceiver module or cable has been installed or no link is present on the
port.
SFP+ port LED
Table 26 SFP+ port LED description
LED status
Description
Steady green
A transceiver module or cable has been correctly installed. The port has a link
and is operating at 10 Gbps.
Flashing green
The port is sending or receiving data at 10 Gbps.
Steady yellow
A transceiver module or cable has been correctly installed. The port has a link
and is operating at 1 Gbps.
Flashing yellow (3 Hz)
The port is sending or receiving data at 1 Gbps.
Off
No transceiver module or cable has been installed, or no link is present on the
port.
Management Ethernet port LED
The copper and fiber management Ethernet ports each is provided with a LINK/ACT LED.
Table 27 Copper management Ethernet port LED description
LED mark
Status
Description
LINK/ACL
Steady green
The port is operating at 10/100/1000 Mbps and a link is present on
the port
Flashing green
The port is receiving or sending data.
Off
No link is present on the port.
Table 28 Fiber management Ethernet port LED description
LED mark
Status
Description
LINK/ACT
Off
No link is present on the port.
Steady green
The port is operating at 1000 Mbps.
Flashing green
The port is receiving or sending data at 1000 Mbps.
Steady yellow
The port is operating at 100 Mbps.
Flashing yellow
The port is receiving or sending data at 100 Mbps.
Fan tray alarm LED
The X712 Bck(pwr)-Frt(prt) HV2 and X711 Frt(prt)-Bck(pwr) HV2 fan trays each have an alarm LED.
