HP FlexFabric 5950 Series, Installation Manual

Page: 12 / 76

8
Installing the switch in a 19-inch rack
IMPORTANT:
To install the switch in a 19-inch rack, make sure the rack has a minimum depth of 1000 mm (39.37
in) so that the rack door can be closed easily.
Installation accessories
Table 5 Installation accessories
Switch
model
Mounting brackets Rack mounting rail kit
HPE 5950
32QSFP28 A pair of 1U mounting
brackets. See
Figure 2 .
•
A pair of 1U long slide rails and one pair of chassis
rails. See
Figure 6 .
•
(Optional.) A pair of 1U short slide rails and one pair
of chassis rails. See
Figure 5 .
HPE 5950
48SFP28
8QSFP28
1U high, one pair. See Figure
3 .
•
1U high, including one pair of long slide rails and one
pair of chassis rails (provided). See
Figure 6 .
HPE 5950
4-slot 2U high, one pair. See Figure
4 .
•
2U high, including one pair of slide rails and one pair
of chassis rails (provided). See
Figure 7 .
Figure 2 Mounting brackets for the HPE 5950 32QSFP28 switch
Figure 3 Mounting brackets for the HPE 5950 48SFP28 8QSFP28 switch