30
mode after 10 sec.
” This means the system will enter
Motion and Collision Detection automatically in 10 seconds,
and then LCD screen turn off after 30 seconds (the
camcorder will turn off the screen temporarily, but still in
standby detection status. Press any button to turn on the
operation screen).
-
In the Motion and Collision Detection mode, when the
camcorder detects any motion in front of lens, or when the
camcorder detects collision, the automatic record will be
activated.
-
In this mode, when the camcorder detects collision or any
motion in front of lens, the video recording will be triggered
and the event will be recorded for 10 seconds (per file). If
the event lasts more than 10 seconds, the camcorder will
keep recording up to 2 minutes.
-
In this mode, the camcorder is in standby mode until event
happens. This mode will consume more battery power.
•
Off:
No parking monitoring activated.
4.
Press the
button to return recording screen.
Note:
1. When
Vibration Detection
or
Motion and Collision Detection
is on, if the external
power supply is disconnected accidentally, the camcorder will record events by
front camera.
2. If battery in a fully charged condition, it can record about 30 minutes video in
Motion and Collision Detection
mode. As the camcorder is used, the battery
storage capacity will decrease gradually. This is a normal phenomenon for the
battery.
3. The video files taken in Parking Mode will be saved in “Parking Mode” folder, which
will not be overwritten by normal video files. However, if the remaining memory
capacity is not enough to save the last normal video file, the oldest Parking Mode
video will be deleted. Please always make sure you backup Parking Mode video
files.
4. Parking Mode folder can save about 40 parking mode files, when parking mode files
are full, loop recording will overwrite the oldest file.
