14
2.5.3
Setting the Universal Time Code (UTC)
Depending on your location, you may need to change the current UTC setting of the
camcorder so that the correct date and time are updated when a GPS signal is
detected.
1.
If recording is in progress, press the
button to stop recording.
2.
Press the
button to open the OSD menu.
3.
Use the
or
buttons to navigate to the
Satellite
Synchronization
option and press the
OK
button. Ensure that the
On
setting is selected and press the
OK
button again to view the UTC
setting.
4.
Refer to the UTC Map below and use the
or
button to
select the desired setting and press the
OK
button to confirm the
setting.
5.
Press the
button to exit the menu.
* Be sure to adjust for daylight saving time (DST) by 1 hour to the UTC
offset** These areas may observe half hour increments and daylight saving time
(DST)
