To connect the TV tuner to your existing satellite TV or cable TV source with a receiver, follow these
steps:
1.
Connect an RF coaxial cable (purchased separately) from your cable or satellite TV wall jack
(1)
to the TV-In jack on your cable or satellite receiver
(2)
.
2.
Connect an RF coaxial cable (purchased separately) from the TV-Out jack
(3)
on your cable or
satellite receiver to the TV tuner
(4)
.
NOTE:
For improved video quality you can connect your receiver to the TV tuner using a
composite video or S-Video cable instead of an RF coaxial cable. Refer to Chapter 4,
Advanced
connections on page 17
, for instructions.
3.
Insert the TV tuner into a USB port
(5)
on the computer.
NOTE:
Due to power and bandwidth requirements, do not insert the TV tuner into a USB hub.
4.
Connect the remote sensor to a USB port on the computer. Refer to
Step 5: Connect the remote
sensor and infrared (IR) emitter cable on page 12
, for details.
NOTE:
For additional connection steps, such as adding a television, refer to Chapter 4,
Advanced
connections on page 17
.
Step 4: Set up your audio/video connection
11
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
