3.
Turn on your TV.
4.
Be sure that your TV is set to view the correct video source (such as video 1 or video 2).
5.
Press
fn+f4
on your computer keyboard one or more times to display your computer screen on
your TV.
If you connected your TV after running the Setup Wizard for the first time, you may need to reconfigure
settings.
NOTE:
If you have not yet run the Setup Wizard, you do not need to perform the following procedure.
The Setup Wizard will guide you through all the configuration steps required for your connection.
Configuring the TV display
You can use MediaSmart, QuickPlay, or Windows Media Center to configure the display on your TV.
To configure the TV display using MediaSmart, follow these steps:
1.
Open MediaSmart:
●
From your Windows desktop, click
Start
, and then click
HP MediaSmart
.
– or –
●
Press the media button on the computer.
2.
Click the
TV
icon on the SmartMenu.
3.
Click the
Settings
icon, and then click
TV Source
.
4.
Follow the on-screen instructions.
Adding a TV to your system
23
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
