HP ESG Series User Manual Download Page 246

Page: 246 / 348

5-137

Hardkey and Softkey Reference

Return

This front panel hardkey moves you from your current softkey menu to the
softkey menu that precedes it. For example, press the

LF Out

front panel hardkey.

The LF Out menu is displayed. Now press the

LF Out Source

softkey. (The arrow

indicates that pressing this softkey will display another menu.) You should now
see the LF Out Source menu. Press

Return

, and you are moved back to the LF Out

menu.

When you are at the top level of the menus the

Return

key has no function.

The

Return

key has autorepeat capability. Hold it down and you are moved

repeatedly back through the menus until you either release the key or you reach
the top level of the menus.

While you are entering data with the numeric keypad, pressing the

Return

key

cancels the data input and leaves the original value unchanged.

Summary of Contents for ESG Series





























































































































































































































































































































































Search results

Summary of Contents for ESG Series

Reviews:

Related manuals for ESG Series

Brands by name

Popular brands

HP ESG Series, User Manual

Search results

Summary of Contents for ESG Series

Reviews:

Related manuals for ESG Series

Brands by name

Popular brands