HP ep9010 User Manual Download

Page: 53 / 85

Maintaining the projector

User’s Guide

5. Insert the new lamp module into the projector and tighten the two screws.

6. Insert the tab on the front cover into the slot in the projector and close the

cover.

7. Tighten the screws that hold the cover.

8. Turn on the projector. If the lamp does not turn on after the warm-up period,

try reinstalling the lamp.

9. Press

menu,

go to

Setup > Reset lamp hours,

and press

ok.

Replacing the battery in the remote
control

1. On the back of the remote control, push in the tab

and remove the battery

cover

to reveal the batteries.

2. Remove the old batteries and install two new AAA batteries

3. Install the battery cover.

When discarding old batteries, contact your local waste-disposal provider
regarding local restrictions on the disposal or recycling of batteries.

Summary of Contents for ep9010






















































































Search results

Summary of Contents for ep9010

Reviews:

Related manuals for ep9010

Brands by name

Popular brands

HP ep9010, User Manual

Search results

Summary of Contents for ep9010

Reviews:

Related manuals for ep9010

Brands by name

Popular brands