HP ep9010, User Manual

Page: 30 / 85

30 User’s Guide
Setting up
Turning the projector off
1. Press the power button on the projector or remote control to turn off the
projector. Do not hold the button down.
The power button blinks during the cool-down period, then the projector
turns off. Even though the projector is off, it uses a small amount of power
internally.
2. If you want, disconnect video and audio equipment from the projector during
the cool-down period or after the power button stops blinking.
Ä
CAUTION: Do not disconnect power until the projector has cooled down (the fan stops)
and the power button stops blinking. Otherwise, you might shorten the life of the lamp.
3. If you must unplug or remove the projector, wait until the power light stops
blinking, then unplug the power cord.
If you try to turn on the projector again or insert a disc in the DVD tray during the
cool-down period, the projector does not turn on. Wait until the cool-down period
ends and the power button stops blinking.
Moving the projector
When moving the projector:
■
Allow the projector to cool down before moving it. Then disconnect all
cables.
■
Avoid bumps and jolts. Use a padded container when possible.
■
Observe temperature and humidity limits (see “Specifications” on page 69).
If the projector is cold, allow it to warm gradually to avoid condensation.