manualshive.com logo in svg

HP ENVY m6 Sleekbook, Maintenance And Service Manual, Page: 51 / 96

Share
Download
HP ENVY m6 Sleekbook Maintenance And Service Manual Download Page 51

Remove the USB/audio board:

1.

Disconnect USB/audio connector cable 

(1)

 from the system board.

2.

Remove the cable from the adhesive that secures it to the keyboard frame 

(2)

.

3.

Disconnect the USB/audio cable 

(3)

.

4.

Disconnect the subwoofer speaker cable 

(4)

.

5.

Pull up on the USB/audio board 

(5)

, and pull it away from the computer side to remove it 

(6)

.

Reverse this procedure to install the USB/audio board.

Power connector cable

Description

Spare part number

Power connector cable (includes bracket)

725444-001

Before removing the power connector cable, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4.

Remove the service cover (see 

Service cover on page 30

).

5.

Disconnect the battery cable (see 

Battery on page 32

).

Component replacement procedures

43

Summary of Contents for ENVY m6 Sleekbook

































































































Reviews:

No comments