RJ-45 module cover
Description
Spare part number
RJ-45 module cover (plastics kit)
727464-001
Before removing the RJ-45 module cover:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the service cover (see
Service cover on page 30
).
5.
Disconnect the battery cable (see
Battery on page 32
).
Remove the RJ-45 module cover:
1.
Remove the power connector cable and the antenna cables from the clip built into the side of the
RJ-45 module cover.
2.
Remove the 2 Phillips PM2.5×5.5 screws that secure the RJ-45 module cover
(1)
to the computer.
3.
Remove the cover
(2)
.
40
Chapter 4 Removal and replacement procedures