manualshive.com logo in svg

HP ENVY m6 Sleekbook, Maintenance And Service Manual, Page: 20 / 96

Share
Download
HP ENVY m6 Sleekbook Maintenance And Service Manual Download Page 20

Left side

Component

Description

(1)

Security cable slot

Attaches an optional security cable to the computer.

NOTE:

The security cable is designed to act as a

deterrent, but it may not prevent the computer from being
mishandled or stolen.

(2)

HDMI port

Connects an optional video or audio device, such as a
high-definition television, any compatible digital or audio
component, or a high-speed HDMI device.

(3)

USB 3.0 charging (powered) port

Connects an optional USB device. USB charging ports
allow you to charge connected USB devices. Standard USB
ports will not charge all USB devices or will charge using a
low current. Some USB devices require power and require
you to use a powered port.

NOTE:

USB charging ports can also charge select models

of cell phones and MP3 players, even when the computer is
off.

(4)

USB 3.0 port

Connects an optional USB 3.0 device.

(5)

Media Card Reader

Supports the following digital media formats:

●

Secure Digital (SD) Memory Card

●

Secure Digital High Capacity (SDHC) Memory Card

●

Secure Digital Extended Capacity (SDxC) Memory
Card

12

Chapter 2   External component identification

Summary of Contents for ENVY m6 Sleekbook

































































































Reviews:

No comments