HP ENVY dv7-7200 Maintenance And Service Manual Download

Page: 60 / 129

RTC battery

Description

Spare part number

RTC battery (includes cable and double-sided tape)

682091-001

Before removing the RTC battery, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the battery (see

Battery on page 47

Remove the service cover (see

Hard drive on page 48

Remove the RTC battery:

Disconnect the RTC battery cable

(1)

from the system board.

Release the RTC battery

(2)

from the cavity in the base enclosure.

NOTE:

The RTC battery is attached to the base enclosure with double-sided tape. Firm pressure

may be required to release the RTC battery from the base enclosure.

Remove the RTC battery.

Reverse this procedure to install the RTC battery.

Chapter 4 Removal and replacement procedures

Summary of Contents for ENVY dv7-7200


































































































































Search results

Summary of Contents for ENVY dv7-7200

Reviews:

Related manuals for ENVY dv7-7200

Brands by name

Popular brands

HP ENVY dv7-7200, Maintenance And Service Manual

Search results

Summary of Contents for ENVY dv7-7200

Reviews:

Related manuals for ENVY dv7-7200

Brands by name

Popular brands