HP ENVY dv7-7200 Maintenance And Service Manual Download

Page: 29 / 129

Illustrated parts catalog

Service tag

When ordering parts or requesting information, provide the computer serial number and model
description provided on the service tag.

Item

Description

Function

(1)

Product name

This is the product name affixed to the front of
the computer.

(2)

Serial number (s/n)

This is an alphanumeric identifier that is unique to
each product.

(3)

Part number/Product number (p/n)

This number provides specific information about the
product's hardware components. The part number
helps a service technician to determine what
components and parts are needed.

(4)

Warranty period

This number describes the duration of the warranty
period for the computer.

(5)

Model description

This is the alphanumeric identifier used to locate
documents, drivers, and support for the computer.

Service tag

Summary of Contents for ENVY dv7-7200


































































































































Search results

Summary of Contents for ENVY dv7-7200

Reviews:

Related manuals for ENVY dv7-7200

Brands by name

Popular brands

HP ENVY dv7-7200, Maintenance And Service Manual

Search results

Summary of Contents for ENVY dv7-7200

Reviews:

Related manuals for ENVY dv7-7200

Brands by name

Popular brands