HP ENVY dv7-7200 Maintenance And Service Manual Download

Page: 26 / 129

Right side

Item

Component

Description

(1)

Power light

●

White: The computer is on.

●

Blinking white: The computer is in the Sleep state,
which is an energy-saving mode. The computer shuts
off power to the display and other
unneeded components.

●

Off: The computer is off or in Hibernation.
Hibernation is an energy-saving mode that uses the
least amount of power.

NOTE:

For select models, the Intel Rapid Start

Technology feature is enabled at the factory. Rapid
Start Technology allows your computer to resume
quickly from inactivity.

(2)

Hard drive light

●

Blinking white: The hard drive is being accessed.

●

Amber: HP 3D DriveGuard has temporarily parked
the hard drive.

(3)

USB 3.0 port

Connects an optional USB 3.0 device and provides
enhanced USB power performance.

(4)

USB 2.0 port

Connect optional USB devices.

(5)

Optical drive

Reads and writes (select models only) to an optical disc.

(6)

Optical drive light

●

Green: The optical drive is being accessed.

●

Off: The optical drive is idle.

(7)

Optical drive eject button

Ejects the optical disc.

(8)

AC adapter light

●

White: The AC adapter is connected and the battery
is charged.

●

Amber: The AC adapter is connected and the
battery is charging.

●

Off: The computer is using DC power.

Chapter 2 External component identification

Summary of Contents for ENVY dv7-7200


































































































































Search results

Summary of Contents for ENVY dv7-7200

Reviews:

Related manuals for ENVY dv7-7200

Brands by name

Popular brands

HP ENVY dv7-7200, Maintenance And Service Manual

Search results

Summary of Contents for ENVY dv7-7200

Reviews:

Related manuals for ENVY dv7-7200

Brands by name

Popular brands