HP ENVY 14 Maintenance And Service Manual Download Page 76

Page: 76 / 116

Remove the power connector cable:

Disconnect the power extension cable

(1)

from the battery connector board.

Release the power extension cord

(2)

from the system board. (The power extension cord is

attached to the system board with double-sided tape.)

Disconnect the power connector cable

(3)

from the system board.

Release the power connector

(4)

from the alignment clip built into the base enclosure.

Remove the power connector cable.

Reverse this procedure to install the power connector cable.

System board

NOTE:

The system board spare part kit includes replacement thermal material. Replacement thermal

material is also available in the Thermal Material Kit, spare part number 634366-001.

Description

Spare part number

For use only on computer models equipped with an Intel Core i7 processor

608365-001

For use only on computer models equipped with an Intel Core i5, i3, or Pentium processor

608364-001

Chapter 4 Removal and replacement procedures

Summary of Contents for ENVY 14





















































































































Search results

Summary of Contents for ENVY 14

Reviews:

Related manuals for ENVY 14

Brands by name

Popular brands

HP ENVY 14, Maintenance And Service Manual

Search results

Summary of Contents for ENVY 14

Reviews:

Related manuals for ENVY 14

Brands by name

Popular brands