HP ElitePad 1000 G2 Page 42 Maintenance And Service Manual Download

Page: 42 / 126

Release the ZIF connector (5) to which the display LVDS cable is attached, and then disconnect the
display LVDS cable (6) from the display assembly.

The TouchScreen and display LVDS cables are included in the Display Cable Kit, spare part number
718758-001.

To install the display assembly:

Reconnect the display LVDS and TouchScreen cables to the respective ZIF connectors on the display
assembly.

Reconnect the display LVDS and TouchScreen cables to the respective ZIF connectors on the system
board.

Toe the left side of the display assembly into the left side of the bottom case.

Swing the right side of the display assembly down into the right side of the bottom case.

Firmly press all edges of the display assembly surface to ensure it is fully engaged with the
bottom case.

Chapter 5 Removal and replacement procedures

Summary of Contents for ElitePad 1000 G2































































































































Search results

Summary of Contents for ElitePad 1000 G2

Reviews:

Related manuals for ElitePad 1000 G2

Brands by name

Popular brands

HP ElitePad 1000 G2, Maintenance And Service Manual

Search results

Summary of Contents for ElitePad 1000 G2

Reviews:

Related manuals for ElitePad 1000 G2

Brands by name

Popular brands