manualshive.com logo in svg

HP EliteBook x360 830 G5, Maintenance And Service Manual, Page: 11 / 95

Share
Download
HP EliteBook x360 830 G5 Maintenance And Service Manual Download Page 11

1

Product description

Table 1-1

  Product components and their descriptions

Category

Description

Product Name

HP EliteBook x360 830 G5 Notebook PC

Processor

8th Generation Intel® Core™ processors

Intel Core i7-8650U (1.9 GHz, turbo up to 4.2 GHz, 8 MB SmartCache, quad core, 15 W)

Intel Core i7-8550U (1.8 GHz, turbo up to 4.0 GHz, 8 MB SmartCache, quad core, 15 W)

Intel Core i5-8350U (1.7 GHz, turbo up to 3.6 GHz, 6 MB SmartCache, quad core, 15 W)

Intel Core i5-8250U (1.6 GHz, turbo up to 3.4 GHz, 6 MB SmartCache, quad core, 15 W)

Intel Core i3-8130U (2.2 GHz, turbo up to 3.4 GHz, 4 MB SmartCache, quad core, 15 W)

Graphics

Integrated UMA graphics

Intel UHD Graphics 620

Supports HD decode, DX12, HDMI 1.4, and HDCP 2.2 via DisplayPort up to 4K @ 60 Hz and via HDMI up to 4K 
@ 30 Hz

Supports 2 external monitors when on the HP Elite 90W Thunderbolt 3 Dock; Max resolution = 2.5K @ 60 Hz 
(DisplayPort 1) and 2.5K @ 60 Hz (DisplayPort 2) or 4K @ 60 Hz (one DisplayPort) and 4K @ 60 Hz (Type-C 
output port using a Type C-to-DP adapter)

Supports 2 external monitors when on the HP Thunderbolt Dock 120W G2; Max resolution = 2.5K @ 60 Hz 
(DisplayPort 1) and 2.5K @ 60 Hz (DisplayPort 2) or 4K @ 60 Hz (one DisplayPort) and 4K @ 60 Hz (Type-C 
output port using a Type C-to-DP adapter)

Display panel

33.8-cm (13.3 in.), FHD (1920 × 1080), UWVA, touch screen, narrow bezel

Anti glare, 1000 nits, 72% CG, eDP + PSR, ultra slim, ambient light sensor, HD + IR camera, for WWAN

BrightView, 1000 nits, 72% CG, eDP + PSR, ultra slim, ambient light sensor, HD + IR camera, for WWAN

BrightView, 1000 nits, 72% CG, eDP + PSR, ultra slim, ambient light sensor, HD + IR camera

Anti glare, 400 nits, 72% CG, eDP + PSR, ultra slim, ambient light sensor, HD + IR camera, for WWAN

BrightView, 400 nits, 72% CG, eDP + PSR, ultra slim, ambient light sensor, HD + IR camera, for WWAN

BrightView, 400 nits, 72% CG, eDP + PSR, ultra slim, ambient light sensor, HD + IR camera

BrightView, 250 nits, 45% CG, eDP, slim, HD camera, for WWAN

BrightView, 250 nits, 45% CG, eDP, slim, HD camera

BrightView, 220 nits, 45% CG, eDP, slim, HD camera, for WWAN

BrightView, 220 nits, 45% CG, eDP, slim, HD camera

Memory

Two SODIMM slots, accessible/upgradeable

DDR4-2400 dual channel support (quad core processors)

DDR4-2133 dual channel support (dual core processors)

Supports up to 32 GB maximum system memory in the following configurations:

1

Summary of Contents for EliteBook x360 830 G5
































































































Reviews:

No comments