manualshive.com logo in svg

HP Elitebook 8560W, Maintenance And Service Manual, Page: 130 / 175

Share
Download
HP Elitebook 8560W Maintenance And Service Manual Download Page 130

d.

Flex the top 

(1)

 of the bezel from the inside edge until it disengages from the display back

cover.

e.

Flex the inside edge of the left side and the right side 

(2)

 of the bezel until it disengages

from the display back cover.

f.

Flex the bottom 

(3)

 of the bezel from the inside edge until it disengages from the display

back cover.

g.

Remove the display bezel from the display back cover 

(4)

.

2.

Remove the six Torx 9M2.5×5.0 screws that secure the display panel to the display enclosure.

3.

Disengage the display panel from the base enclosure by closing the display enclosure to 45
degrees while holding the sides of the display panel.

4.

Remove the two pieces of tape that secure cables to the back of the display panel.

5.

Remove the eight 

(1)

 Phillips M2.0×3.0 screws that secure the display panel to the display

hinges (four on either side).

122 Chapter 4   Removal and replacement procedures

Downloaded from LpManual.com Manuals

Summary of Contents for Elitebook 8560W
















































































































































































Reviews:

No comments