HP EliteBook 850 G7 Maintenance And Service Manual Download

Page: 75 / 109

Leave the computer upright on the table for 10 minutes to be sure the panel sits correctly in the
display.

m. Open the display and remove rubber spacer strips.

13.

If you need to remove the hub board from the display:

Disconnect the display cable from the ZIF connector (1) on the hub board.

Disconnect the camera cable from the ZIF connector (2) on the hub board.

Disconnect the smaller cables from the reverse ZIF connectors on the hub board (3) (4).

Use a tool (5) to release the board from the display rear cover (6).

The hub board is available as spare part number M07211-001 in models with an IR camera and
M07210-001 in models with an RGB camera or microphone module.

Component replacement procedures

Summary of Contents for EliteBook 850 G7














































































































Search results

Summary of Contents for EliteBook 850 G7

Reviews:

Related manuals for EliteBook 850 G7

Brands by name

Popular brands

HP EliteBook 850 G7, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 850 G7

Reviews:

Related manuals for EliteBook 850 G7

Brands by name

Popular brands