HP EliteBook 735 G5 Maintenance And Service Manual Download

Page: 66 / 112

Smart card reader

Description

Spare part number

Smart card reader

L13690-001

Smart card reader plastic insert (for use in models without a smart card reader)

L13692-001 (Plastics Kit)

Smart card insert

L13692-001 (Plastics Kit)

Smart card reader cable (available in Cable Kit)

L13678-001 (Cable Kit)

Before removing the card reader, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.

Remove the bottom cover (see

Bottom cover on page 30

Remove the battery (see

Battery on page 43

Remove the smart card reader:

NOTE:

Before you remove the smart card reader, make sure nothing (memory card or plastic insert) in

inserted in the reader.

Disconnect the system board cable from the connector on the smart card reader board (1).

Disconnect the TouchPad cable from the ZIF connector on the smart card reader board (2).

Remove the three Phillips M2.0x2.5 screws (3) that secure the smart card reader to the computer.

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for EliteBook 735 G5

















































































































Search results

Summary of Contents for EliteBook 735 G5

Reviews:

Related manuals for EliteBook 735 G5

Brands by name

Popular brands

HP EliteBook 735 G5, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 735 G5

Reviews:

Related manuals for EliteBook 735 G5

Brands by name

Popular brands