Solid-state drive (SSD)
Description
Spare part number
512 GB, PCIe, Gen3×4, Self-encrypting drive (SED), Opal 2, TLC
L13671-001
512 GB, SATA-3, FIPS-140–2, TLC
L13670-001
360 GB, PCIe Gen3×4, NVMe,TLC
L13673-001
256 GB, PCIe, Gen3x4, SS, NVMe, TLC
L13668-001
256 GB, PCIe, NVMe, value
L13669-001
256 GB, SATA-3, Opal 2, TLC
L13667-001
128 GB, SATA-3, TLC
L13666-001
Before removing the solid-state drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable from the system board (see
).
Remove the solid-state drive:
1.
Remove the Phillips M2.0×2.0 screw (1) that secures the drive to the system board.
2.
Remove the drive by pulling it away from the connector (2).
NOTE:
M.2 solid-state drives are designed with notches to prevent incorrect insertion.
Reverse this procedure to install the solid-state drive.
32
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
