1.
Remove the two Phillips M2.0×3.0 screws that secure the keyboard to the computer (1).
NOTE:
The screws are labeled with a keyboard symbol.
2.
Insert a screwdriver or similar thin tool into the hole near the fan, and then press on the back of the
keyboard until it disengages from the computer (2).
NOTE:
Cables connect the bottom of the keyboard to the system board. Make sure not to prematurely
pull the keyboard cables out of the system board connectors.
3.
Position the computer upright with the front toward you, and then open the computer as far as possible.
40
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
