manualshive.com logo in svg

HP EliteBook 725 G4, Maintenance And Service Manual

The HP EliteBook 725 G4 is a versatile and powerful laptop featuring cutting-edge technology and sleek design. To ensure easy maintenance and hassle-free service, make sure to download the Maintenance And Service Manual. This comprehensive manual is available for free download at manualshive.com, providing detailed instructions and valuable insights for optimal product performance.

Share
Download
background image

Fingerprint reader assembly

Description

Spare part number

Fingerprint reader assembly (includes cable, bracket, and bezel)

821693-001

Before removing the fingerprint reader assembly, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unscrewing the power cord from the AC outlet, and 
then unscrewing the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 33

).

5.

Remove the battery (see 

Battery on page 36

).

6.

Remove the system board (see 

System board on page 49

).

Remove the fingerprint reader assembly:

1.

Remove the Phillips PM2.5x3.0 screw (1) that secures the bracket to the top cover.

2.

Slide the bracket right, and then lift it off the top cover (2).

3.

Disconnect the fingerprint reader board cable from the system board.

4.

Remove the fingerprint reader board and cable assembly from the top cover (3).

Reverse this procedure to install the fingerprint reader assembly.

Component replacement procedures

55

Summary of Contents for EliteBook 725 G4






































































































Reviews:

No comments

Related manuals for EliteBook 725 G4

Prestigio ION Super Slim series Quick Manual preview
ION Super Slim series
Brand: Prestigio Pages: 7

Brands by name

Popular brands

Load more brands