manualshive.com logo in svg

HP EliteBook 725 G4, Maintenance And Service Manual

The HP EliteBook 725 G4 is a versatile and powerful laptop featuring cutting-edge technology and sleek design. To ensure easy maintenance and hassle-free service, make sure to download the Maintenance And Service Manual. This comprehensive manual is available for free download at manualshive.com, providing detailed instructions and valuable insights for optimal product performance.

Share
Download
background image

Mass storage devices

Item

Component

Spare part number

(1)

Hard drive:

 

1-TB, 5400-rpm, 7.0-mm

762990-001

 

500-GB, 7200-rpm, 7.0-mm

703267-001

 

500-GB, 7200-rpm, 7.0-mm, FIPS

820572-001

 

500-GB, 7200-rpm, 7.0-mm, SED

820573-001

(2)

Hard Drive Hardware Kit (includes hard drive connector cable, hard drive rubber bracket, and 
screws)

821665-001

(3)

Solid-state drive:

 

512-GB, Turbo Drive, G2, TLC

915943-001

 

360-GB, PCIe, TLC

915941-001

 

256-GB, Turbo Drive, G2, TLC

915939-001

 

256-GB, SATA-3, SED, OPAL, TLC

915940-001

 

128-GB, M.2, SATA-3

915938-001

Mass storage devices

25

Summary of Contents for EliteBook 725 G4






































































































Reviews:

No comments

Related manuals for EliteBook 725 G4

Brands by name

Popular brands

Load more brands