HP EliteBook 2560p User Manual Download | Manualshive

Page: 112 / 124

background image

Downloading a BIOS update

CAUTION:

To prevent damage to the computer or an unsuccessful installation, download and install

a BIOS update only when the computer is connected to reliable external power using the AC adapter.
Do not download or install a BIOS update while the computer is running on battery power or connected
to an optional power source. During the download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Sleep or Hibernation.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

To download a BIOS update:

1.

Access the page on the HP Web site that provides software for your computer:

Select

Start

>

Help and Support

>

Maintain

>

Software Updates

.

2.

Follow the instructions on the screen to identify your computer and access the BIOS update you
want to download.

3.

At the download area, follow these steps:

a.

Identify the BIOS update that is later than the BIOS version currently installed on your
computer. Make a note of the date, name, or other identifier. You may need this information
to locate the update later, after it has been downloaded to your hard drive.

b.

Follow the instructions on the screen to download your selection to the hard drive.

Make a note of the path to the location on your hard drive where the BIOS update will be
downloaded. You will need to access this path when you are ready to install the update.

NOTE:

If you connect your computer to a network, consult the network administrator before

installing any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the
download is complete. If no instructions are displayed, follow these steps:

1.

Open Windows Explorer by selecting

Start

>

Computer

.

2.

Double-click your hard drive designation. The hard drive designation is typically Local Disk (C:).

3.

Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the
update.

4.

Double-click the file that has an .exe extension (for example,

filename

.exe).

The BIOS installation begins.

5.

Complete the installation by following the instructions on the screen.

The system automatically shuts down after the BIOS has successfully updated.

NOTE:

After a message on the screen reports a successful installation, you can delete the downloaded

file from your hard drive.

102 Chapter 11 Software updates

«
...
110
111
112
113
114
...
»

Summary of Contents for EliteBook 2560p





























































































































Reviews:

No comments

Related manuals for EliteBook 2560p

Vantage Pro2 Updater

Brand: DAVIS Pages: 12

Brand: AMX Pages: 212

DRAGON NATURALLYSPEAKING ESSENTIALS

Brand: Dragon Systems Pages: 26

Contivity VPN Client

Brand: Nortel Pages: 90

Configuring Arrays

Brand: HP Pages: 132

Brand: HP Pages: 26

Brand: HP Pages: 35

460C - Deskjet Color Inkjet Printer

Brand: HP Pages: 24

Brand: HP Pages: 201

BB118BV - StorageWorks Data Protector Express Package

Brand: HP Pages: 365

BB118BV - StorageWorks Data Protector Express Package

Brand: HP Pages: 35

2605dtn - Color LaserJet Laser Printer

Brand: HP Pages: 372

e-diagtools 4.0

Brand: HP Pages: 74

Brand: British Telecom Pages: 4

Brand: Cabletron Systems Pages: 92

Brand: Juniper Pages: 9

Application Update

Brand: TomTom Pages: 11

Brand: GRASS VALLEY Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands