Front-facing webcam
NOTE:
The front-facing webcam is included in the Webcam Kit, spare part number 793724-001, and
includes double-sided adhesive.
The front-facing webcam spare part kit does not include the front-facing webcam cable. The front-facing
webcam cable is included in the Slate Cable Kit, spare part number 793721-001.
Before removing the front-facing webcam, follow these steps:
1.
Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and
then shut it down through the operating system.
2.
Disconnect all external devices connected to the slate.
3.
Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the slate.
4.
Remove the display panel assembly (see
Display panel assembly on page 35
), and then remove
the following components:
a.
Battery (see
Battery on page 39
)
b.
WLAN module (see
WLAN module on page 40
)
c.
WWAN module (see
WWAN module on page 42
)
d.
Fan (see
Fan on page 46
)
e.
System board (see
System board on page 52
)
f.
Rear-facing webcam (see
Rear-facing webcam on page 64
)
Remove the front-facing webcam:
1.
Release the ZIF connector (1) to which the front-facing webcam board cable is attached, and then
disconnect the front-facing webcam board cable from the system board.
2.
Detach the front-facing webcam board cable (2) from the system board. (The front-facing webcam
board cable is attached to the system board with double-sided adhesive.)
Front-facing webcam
65
