Speakers
Description
Spare part number
Speakers (include left and right speakers and cables)
793729-001
Before removing the speakers, follow these steps:
1.
Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and
then shut it down through the operating system.
2.
Disconnect all external devices connected to the slate.
3.
Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the slate.
4.
Remove the display panel assembly (see
Display panel assembly on page 35
).
5.
Remove the battery (see
Battery on page 39
).
Remove the speakers:
1.
Disconnect the speaker cable (1) from the docking connector board.
2.
Remove the four Phillips PM1.6×2.5 screws (2) that secure the speakers to the bottom cover.
3.
Release the speakers cables from the retention tabs (3) built into the bottom cover.
4.
Remove the speakers (4).
Reverse this procedure to install the speakers.
44
Chapter 5 Removal and replacement procedures – slate
