Speaker
Description
Spare part number
Speaker
645330-001
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 75
).
2.
Remove the access panel (
Computer Access Panel on page 123
).
3.
Remove the front fan assembly (
Front Fan Assembly on page 147
).
4.
Disconnect the speaker wire from the system board connector labeled SPKR.
5.
From the inside of the chassis, remove the two silver Torx T15 screws
(1)
that secure the
speaker to the chassis.
6.
Rotate the top of the speaker downward
(2)
, and then remove it from the chassis.
Figure 7-31
Removing the speaker
To replace the speaker, reverse the removal procedures.
156 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
Summary of Contents for Elite 8300 Series Convertible Minitower
Page 4: ...iv About This Book ...
