EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at
EL-MF877-01
c) Lift the cover off the power supply.
d) Cut the plastic cable clamp that secures the cables to the power cable.
e) Remove the four screws of the PFC module.
f) Lift the PFC out of the power supply cage.
4.3 Remove the power supply fan (see Figures 49&50)
a) Remove the four screws on the power supply
b) Lift the power supply fan from the cage.
4.4 Remove the power supply PCA: (see Figure 51-55 below)
a) Remove the screw that secure the ground to the cage.
b) Remove the screw that secure the switch to the chassis
c) Push the switch and light out of the cage.
d) Remove the four screws that secure the power supply PCA to the chassis.
e) Remove the power supply PCA from the power supply chassis.
4.4 Remove the Electrolytic Capacitors:(see Figure 56&57 below)
a) Using Soldering Iron, heat the solder of Electrolytic Capacitors.
b) Remove the Electrolytic Capacitors.
5.
6.
7.
8.
9.
10.
11.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
