HP E1725C, Getting Started Manual

Page: 26 / 100

Chapter 1 How to Begin
Power-Up and Health Check
1-10 Getting Started Guide
1
Power-Up and Health Check
Start
1 Switch on the VXI mainframe before the computer.
2 Switch on the computer.
Start the HP TIA Software
1 Double-click the Disk Test Program Group icon in Windows to open the
group.
2 Double-click the HP-TIA icon to start the application.
Set the Interface Type
If this is the first time you have started the software, or if no interface has
been previously selected, you will be reminded to select the interface now.
Click OK and continue with step 2. Otherwise, select the interface with
the following steps:
1 Select Control>E1740 interface... .
The HP E1740A Interface setup window will appear.
2 Select the appropriate interface and addressing. Refer to the on-line Help
under the topic of “Interface” and the corresponding documentation that
came with the interface. Refer to the HP E1740A User’s Guide for details
on address switch settings.
3 Click on OK once the setting is chosen.