manualshive.com logo in svg

HP E1403C, Installation And User Manual, Page: 12 / 32

Share
Download
HP E1403C Installation And User Manual Download Page 12

Installation/Removal Instructions  

11

Chapter 2

Chapter 2

Installation/Removal Instructions

This chapter shows how to install/remove B-size VXIbus modules into/from 
the HP E1403C or HP E1407A C-Size Adapter Module, and how to 
install/remove the adapter module into a C-Size VXIbus Mainframe.

Note

The procedures in this chapter shows installation/removal of the Adapter 
Module into/from the HP E1401A High Power Mainframe.  The 
procedures for other mainframes are similar to these procedures.

Preparing for Installation

•

Be sure to set the logical address of the module to be installed into the 

adapter to the correct address (see the module manual).

•

Be sure to use clean handling and anti-static handling of the module.

•

Be sure there are no external connections to the modules.

Installing A-Size VMEbus Modules (HP E1403C Only)

Install A-Size VMEbus Modules only in the HP E1403C Adapter Module.  
Use the following B-Size Module installation procedure to install an A-Size 
Module into the adapter module.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for E1403C

































Reviews:

No comments