6.
Repeat the same for the second bracket bolt (5). The E-MSM466-R with attached bracket
should now look similar to Figure 5.
Figure 5 Mounting Bracket Attached
1
2
3
1
2
4
5
5
6
6
4. Bracket
1. Screw holes (x4)
5. Bracket bolt (x2)
2. Pole clamp slot (x4)
6. Bracket post (x2)
3. Pole cut out
7.
Hold the E-MSM466-R with the Ethernet connector pointing toward the ground near the desired
position on the pole and press the pole cut out (3) against the pole.
8.
Refer to Figure 6. For the first pole clamp, wrap the pole clamp around the pole, feed it though
one pole clamp slot and then back out the other pole clamp slot, and then around the pole,
and into the pole clamp anchor. Hold the E-MSM466-R firmly against the pole at the desired
position and then fully tighten the pole clamp screw to anchor the E-MSM466-R against the
pole. Attach the second pole clamp in the same manner as the first, also firmly tightening it.
Figure 6 E-MSM466-R mounted on pole
1
2
5
3
3
4
4
4. Pole clamp (x2)
1. Bracket post
5. Pole
2. Bracket
3. Pole clamp slot (x2)
12
Installing
