HP Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz Maintenance And Service Manual Download Page 90

Page: 90 / 186

20.

Disconnect the display panel cable

(3)

and the backlight cable

(4)

from the display inverter.

21.

Remove the display inverter. The display inverter is available using spare part number
480447-001.

22.

If it is necessary to replace the display hinges, remove the two Phillips PM2.5×5.0 screws

(1)

and

the four Phillips PM2.5×4.0 screws

(2)

that secure the display hinges to the display panel.

23.

Remove the eight Phillips PM2.0×4.0 screws

(1)

that secure the display hinges to the display panel.

Chapter 4 Removal and replacement procedures

Summary of Contents for Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz



























































































































































































Search results

Summary of Contents for Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz

Reviews:

HP Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz, Maintenance And Service Manual, Page: 90 / 186

Search results

Summary of Contents for Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz

Reviews: