HP Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz Maintenance And Service Manual Download Page 135

Page: 135 / 186

System interrupt specifications, Intel

Hardware IRQ

System function

IRQ0

System timer

IRQ1

Standard 101-/102-Key or Microsoft Natural Keyboard

IRQ2

Cascaded

IRQ3

Intel 82801DB/DBM USB2 Enhanced Host Controller—24CD

IRQ4

COM1

IRQ5*

Conexant AC—Link Audio Intel 82801DB/DBM SMBus Controller—24C3 Data Fax
Modem with SmartCP

IRQ6

Diskette drive

IRQ7*

Parallel port

IRQ8

System CMOS/real-time clock

IRQ9*

Microsoft ACPI-compliant system

IRQ10*

Intel USB UHCI controller—24C2

Intel 82852/82855 GM/GME Graphic Controller

Realtek RTL8139 Family PCI Fast Ethernet Controller

IRQ11

Intel USB EHCI controller—24CD

Intel USB UHCI controller—24C4

Intel USB UHCI controller—24C7

Intel Pro/Wireless 2200BG

TI OHCI 1394 host controller

TI PCI1410 CardBus controller

IRQ12

Synaptics PS/2 TouchPad

IRQ13

Numeric data processor

IRQ14

Primary IDE channel

IRQ15

Secondary IDE channel

*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none.

NOTE:

PC Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial port

may assert IRQ3 or IRQ4.

System interrupt specifications, Intel 125

Summary of Contents for Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz



























































































































































































Search results

Summary of Contents for Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz

Reviews:

Related manuals for Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz

Brands by name

Popular brands

HP Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz, Maintenance And Service Manual

Search results

Summary of Contents for Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz

Reviews:

Related manuals for Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz

Brands by name

Popular brands