HP Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz Maintenance And Service Manual Download Page 89

Page: 89 / 186

14.

Disconnect the webcam/microphone module cable

(3)

from the webcam/microphone module.

15.

Remove the webcam/microphone module. The webcam/microphone module is available using
spare part number 480446-001.

16.

If it is necessary to replace the display inverter, remove the 7 Phillips PM2.5×5.0 screws

(1)

that

secure the display inverter cover to the display bezel.

17.

Remove the display inverter cover

(2)

by lifting it straight up. The display inverter cover is available

using spare part number 485606-001.

18.

Remove the Phillips PM2.5×5.0 screw

(1)

that secures the display inverter to the display bezel.

19.

Release the inverter

(2)

as far from the display bezel as the display panel cable and backlight

cables allow.

Component replacement procedures

Summary of Contents for Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz



























































































































































































Search results

Summary of Contents for Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz

Reviews:

HP Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz, Maintenance And Service Manual, Page: 89 / 186

Search results

Summary of Contents for Dv7-1127cl - Pavilion Entertainment - Turion X2 2.1 GHz

Reviews: