Manageability
Manageability
Manageability
Manageability
Insight Manager 7
Remote Insight Lights-Out Edition (optional)
ROM-Based Setup Utility (RBSU)
Integrated Management Display (IMD)
Server Health logging
Automatic Server Recovery-2 (ASR-2)
System Interconnect Status Indicators
Remote-Flash Redundant ROM
Hot Spare Boot
(NOTE:
NOTE:
NOTE:
NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the system will
automatically reboot and use the remaining good processor(s).)
Power Down Utility
Power Supply Viewer
Pre-Failure Warranty (covers processors, as well as hard drives and memory)
Availability
Availability
Availability
Availability
PCI-X/PCI Hot Plug with push button functionality
Redundant Hot Plug Fans
Smart Array 5300 Controller (optional)
Dynamic sector repairing and drive parameter tracking (with Smart Array controllers)
Redundant Processor Power Modules
Redundant/adaptive load balancing NIC Support
Hot Plug Dual Port 10/100 TX NIC
Redundant Hot Plug Power Supplies
ECC Memory
Security
Security
Security
Security
Power-on password
Hot plug keyboard password
Diskette drive control
Diskette boot control
Network server mode
Security provision
Parallel and serial interface control
Administrator's password
Disk configuration lock
Hot plug access security
Server Power Cords
Server Power Cords
Server Power Cords
Server Power Cords
Two Lowline power cords & two Highline power cords ships standard
Power Supply
Power Supply
Power Supply
Power Supply
Two Redundant Hot Plug 1150/500-Watt power supplies per system. Power supplies are load sharing and provide 1150
Watts of Redundant power for 220 volt input or 500 Watts of Redundant power for 110 volt input.
NOTE:
NOTE:
NOTE:
NOTE: To ensure redundancy of server power, HP recommends that 200-240 VAC power be used for all deployments. This
will ensure that both power supplies can support up to their maximum configurations, and remain in a redundant power
supply state.
NOTE:
NOTE:
NOTE:
NOTE: A maximum of two power supplies are supported.
System Fans
System Fans
System Fans
System Fans
Two Hot-Plug redundant fans ship standard. Two maximum supported.
Required Cabling
Required Cabling
Required Cabling
Required Cabling
For required cabling information, refer to the Web site at:
http://h18000.www1.hp.com/products/servers/ProLiantDL760/
.
QuickSpecs
Compaq ProLiant DL760
Compaq ProLiant DL760
Compaq ProLiant DL760
Compaq ProLiant DL760
Standard Features
DA - 10813 North America — Version 39 — October 17, 2003
Page 5
