HP DL360 - ProLiant - Photon Maintenance And Service Manual Download Page 61 | Manualshive

Page: 61 / 75

background image

Diagnostic Tools

HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide

4-5

•
•
•

•
•
•

•
•

SmartStart software can:

Install selected server operating systems using packaged product CDs.

Install the latest optimized drivers.

Create and copy standard server configuration scripts using the Scripting Toolkit and
Configuration Replication Utility.

Test server hardware using the new Enterprise Diagnostics LX32 Utility.

Update the latest system or option ROM using the ROM Update Utility.

Install software drivers directly from the CD. With systems that have internet connection,
the SmartStart Autorun Menu provides access to the complete list of ProLiant System
Software on the website.

For more information about SmartStart software, refer to

www.hp.com/servers/smartstart.

SmartStart Autorun Menu

The SmartStart Autorun Menu can access the latest system software directly from the
operating system environment, simply by inserting the SmartStart CD into a configured
system. The Autorun Menu can:

Install the latest ProLiant Support Packs.

Download specific drivers and utilities.

SmartStart Scripting Toolkit

The SmartStart Scripting Toolkit is a set of Microsoft MS-DOS-based utilities that configure
and deploy servers in a customized, predictable, and unattended manner. These utilities
provide scripted server and array replication for mass server deployment and duplicate the
configuration of a source server onto target systems with minimum user interaction.

For more information, and to download the SmartStart Scripting Toolkit, refer to

www.hp.com.

Enterprise Diagnostics LX32 Utility

The Enterprise Diagnostics LX32 Utility displays information about the server hardware and
tests the system to be sure that it is operating properly. Access the Enterprise Diagnostics
LX32 Utility from the SmartStart CD or from

www.hp.com

For more information, refer to the Management CD in the HP ProLiant Essentials
Foundation Pack.

«
...
59
60
61
62
63
...
»

Summary of Contents for DL360 - ProLiant - Photon












































































Reviews:

No comments

Related manuals for DL360 - ProLiant - Photon

Rangebooster G WNA-2330

Brand: D-Link Pages: 2

Powerline DHP-300

Brand: D-Link Pages: 12

Powerline AV+ DHP-309AV

Brand: D-Link Pages: 2

Powerline AV+ DHP-309AV

Brand: D-Link Pages: 3

Brand: D-Link Pages: 2

Brand: D-Link Pages: 8

PersonalAir DBT-120

Brand: D-Link Pages: 8

Express EtherNetwork DNS-120

Brand: D-Link Pages: 16

Brand: D-Link Pages: 16

Brand: D-Link Pages: 5

Brand: D-Link Pages: 21

WDA-2320 RangeBooster G

Brand: D-Link Pages: 16

Brand: D-Link Pages: 16

PowerLine DHP-500AV

Brand: D-Link Pages: 22

Brand: D-Link Pages: 2

Brand: D-Link Pages: 3

PCMCIA WIRELESS ASAPTER DWL-650

Brand: D-Link Pages: 12

Rangebooster G WNA-2330

Brand: D-Link Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands