Memory
One of the following
depending on Model
Type
DDR3 1066/1333MHz Unbuffered (UDIMM) and Registered (RDIMM)
Standard (Entry Model)
2GB (1x2GB) UDIMM
Standard (Base Models) 2GB (1x2GB) UDIMM
Standard (Performance
Models)
4GB (2x2GB) RDIMM
Maximum Memory
Supports up to 16GB DDR3 1066/1333 Unbuffered ECC DIMM or 16GB
DDR3 800/1066/1333 Registered DIMM.
Supports up to 4 UDIMMs or 6 dual rank RDIMMs
NOTE:
Depending on the memory configuration and processor model, the memory speed may run
at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator
.
Network Controller
Embedded NC107i Gigabit Server Adapter
Expansion Slots
Technology
Bus
Width
***
Connector
Width
Bus
Number
*
Device No.
**
Form
Factor
Notes
1
(Standard)
PCIe G2
X16
x16
0
1
Full length,
full height
slot
2
(Standard)
PCIe G1
X4
x8
0
28
Half height,
low profile
slot
1
(Optional)
PCI-X
(133MHz,
3.3Volt)
64-bit
N/A
0
1
Full length,
full height
slot
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus
assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus)
*** Indicates the number of physical electrical lanes running to a PCI-e connector.
Storage Controllers
Entry and Base Model
HP Smart Array B110i SATA RAID Controller (RAID 0/1/1+0)
NOTE:
Transfer rate: 3Gb/s SATA
NOTE:
SATA Hot Plug available via Hot Plug Advance Pack for B110i
NOTE:
Hot Plug SAS and SATA controllers available via PCI card
option.
NOTE:
Smart Array SAS Controller requires the HP CA ASSY 384SATA
to MINI-SAS Kit (P/N 487734-B21) must be ordered.
Performance Model
HP Smart Array P212/256MB Controller (RAID 0/1/1+0/5/5+0)
QuickSpecs
HP ProLiant DL120 Generation 6
Standard Features
DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010
Page 4
