NOTE:
Only supported in DC SAN Directors (AK857A, AK857B,
AK857C, AR479A, AR479B, AR478A and AR478B). The 10/24 Blade is
only compatible with 8Gb or 10Gb blades in the same chassis.
NOTE:
Requires B-series CEE optical SFP transceivers for each port as
listed below.
HP Multi Protocol Extension Blade
AP865B
22 enabled ports (12 8Gb Fibre Channel and 10 1 GbE) multi-protocol
extension blade for SAN connectivity over FCIP. Additional 1 or 2
10GbE ports require 10GbE performance upgrade (TA751A) which
will impact the number of available 1 GbE ports.
NOTE:
Supports IP Security (´IPsec´) encryption over only one 10GbE
port.
NOTE:
Supported in all B-series SAN Directors. Requires B-series
optical SFP transceivers for each port as listed below.
Add maximum of
4
HP StoreFabric Enhanced Multi Protocol Extension Blade
C8R46A
22 enabled ports (12 8Gb Fibre Channel and 10 1 GbE) multi-protocol
extension blade for SAN connectivity over FCIP. Additional 1 or 2
10GbE ports require 10GbE performance upgrade (TA751A) which
will impact the number of available 1 GbE ports.
NOTE:
Supports IP Security (´IPsec´) encryption over both 10GbE
ports.
NOTE:
Supported in all B-series SAN Directors. Requires B-series
optical SFP transceivers for each port as listed below.
Add maximum of
4
HP StoreFabric DC04 SAN Director 16 Gb Core Switch Blades
C8R82A
2 Core Switch Blades to upgrade the DC04 SAN Director chassis to
16Gb capability. The new core switch blades allow the DC04 Director
to support 16Gb port blades, 8Gb enhanced blades,
8Gb 64 port blade and all special application blades
NOTE:
The process of upgrading the DC04 SAN Director using the
16Gb Core switch blade is a disruptive process
NOTE:
Two Core switch blades are shipped when an order is placed
for the C8R82A. Both blades are required for the upgrade
NOTE:
Only supported in DC04 SAN Directors (AR479A, AR479B,
AR478A and AR478B)
HP StoreFabric DC SAN Backbone Director 16 Gb Core Switch
Blades
C8R83A
2 Core Switch Blades to upgrade the DC SAN Backbone Director
chassis to 16Gb capability. The new core switch blades allow the DC
SAN Backbone Director to support 16Gb port blades, 8Gb enhanced
blades, 8Gb 64 port blade and all special application blades
NOTE:
The process of upgrading the DC SAN Backbone Director using
the 16Gb Core switch blade is a disruptive process
NOTE:
Two Core switch blades are shipped when an order is placed
for the C8R83A. Both blades are required for the upgrade
NOTE:
Only supported in DC SAN Backbone Director (AK857A,
QuickSpecs
HP SN8000B and DC SAN Director Family
Configuration Information
DA - 12993 Worldwide — Version 39 — December 20, 2013
Page 22
