manualshive.com logo in svg

HP Compaq tc4400, Maintenance And Service Manual

Share
Download
HP Compaq tc4400 Maintenance And Service Manual Download Page 33

Troubleshooting

Maintenance and Service Guide

2–5

Selecting from the System Configuration 
Menu

Table 2-4

System Configuration Menu

Select

To Do This

Language

Change the Computer Setup language.

Boot Options

Enable/disable MultiBoot, which sets a startup 
sequence that can include most bootable devices 
and media in the system.

Device Configurations

Enable/disable:

■

Swap 

Fn

/

Ctrl

 keys.

■

USB legacy support.

■

BIOS DMA data transfers.

■

Fan Always on while on AC Power.

■

Data Execution Prevention.

■

LAN Power save.

Built-In Device Options

Enable/disable:

■

Embedded WLAN Device Radio.

■

Embedded Bluetooth Device Radio.

■

LAN/WLAN Switching.

■

Wake on LAN from Off.

Port Options

Enable/disable:

■

USB Port.

■

1394 Port.

■

CardBus Slot.

Summary of Contents for Compaq tc4400




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands