HP Compaq NX9000, Reference Manual

Page: 82 / 121

Troubleshooting and Maintenance
Troubleshooting Your Notebook
Reference Guide 73
Memory problems
If a message says you are out of memory
•
Make sure drive C is not running low on free space.
•
If you are having memory problems while running MS-DOS programs, use the
MS-DOS or Application and Software troubleshooter in Windows Help: select
Start > Help and Support.
•
The full amount of RAM in your notebook is not available for running
applications. A certain amount of RAM is used for display memory. The amount
of display memory is shown in the BIOS Setup utility.
If memory doesn’t increase after adding RAM
Make sure your notebook is using only PC2100 DDR-266 or higher memory (RAM)
modules.
If the notebook beeps but doesn’t start after adding RAM
You installed an incompatible type of RAM. Remove the module.
Modem problems
If the modem seems slow
•
Excess static or noise on a line reduces the overall transmission speed of the
modem connection. If necessary, contact your telephone company about fixing
this type of problem.
•
If you’re dialing internationally, line noise is often a problem that’s difficult or
impossible to eliminate.
•
If you have call-waiting, disable it. Your telephone company can provide
instructions. It can cause symptoms similar to static.
•
Eliminate extra connections in the line. If possible, connect directly to the
wall jack.
•
Try another telephone line, preferably one normally used for a fax machine or
modem.