HP Compaq nc6300 Maintenance And Service Manual Download

Page: 8 / 252

1–2

Maintenance and Service Guide

Product Description

1.1 Features

✎

Numerous references are made throughout this

Maintenance

and Service Guide

to “full-featured” and “defeatured” units.

A computer model is considered to be full-featured if it has
4 Universal Serial Bus ports, an ExpressCard slot, and the
following components:

■

Volume control buttons

■

Info Center button

■

Digital Media Slot

■

Serial port

■

Parallel port

■

S-Video-out jack

■

Docking connector

A computer model is considered to be defeatured if it has only
2 Universal Serial Bus ports and none of the components in the
preceding list.

■

The following processors are available, varying by computer
model:

❏

Intel Core Duo T2600 (2.16-GHz), T2500 (2.00-GHz),
T2400 (1.83-GHz), or T2300 (1.67-GHz) processor

❏

Intel Core Solo T1300 (1.66-GHz) processor

❏

Intel Celeron M 1.73-GHz, 1.60-GHz, or 1.46-GHz
processor

■

The following displays are available, varying by
computer model:

❏

15.0-inch, SXGA+WVA, TFT (1400 × 1050) with over
16.8 million colors

❏

15.0-inch or 14.1-inch, XGA, TFT (1280 × 800) with
over 16.8 million colors

■

100-, 80-, 60-, and 40-GB high-capacity hard drive, varying
by computer model

Summary of Contents for Compaq nc6300





























































































































































































































































Search results

Summary of Contents for Compaq nc6300

Reviews:

Related manuals for Compaq nc6300

Brands by name

Popular brands

HP Compaq nc6300, Maintenance And Service Manual

Search results

Summary of Contents for Compaq nc6300

Reviews:

Related manuals for Compaq nc6300

Brands by name

Popular brands