manualshive.com logo in svg

HP Compaq nc6220, Hardware And Software Manual

The HP Compaq nc6220 Maintenance And Service Manual is essential for anyone looking to maintain or troubleshoot their device. This comprehensive manual is available for free download from manualshive.com, providing detailed instructions and guidelines to ensure optimal performance and efficient maintenance of the HP Compaq nc6220.

Share
Download
background image

Multimedia

Hardware and Software Guide

4–6

Using the S-Video-Out Jack

To connect a video device to the S-Video-out jack:

1. Plug either end of the S-Video cable into the S-Video-out jack 

on the notebook.

2. Connect the other end of the cable to the video device, as 

instructed in the documentation included with the device.

✎

If the S-Video-out jack on the notebook is not accessible because 
the notebook is docked in an optional docking device, you can 
connect the device to the S-Video-out jack on the docking device.

Summary of Contents for Compaq nc6220























































































































































































































































Reviews:

No comments

Related manuals for Compaq nc6220

IBM ThinkPad 760E Instruction Manual preview
ThinkPad 760E
Brand: IBM Pages: 331
OLPC XO User Manual preview
XO
Brand: OLPC Pages: 37
Olivetti Olibook S1300 User Manual preview
Olibook S1300
Brand: Olivetti Pages: 52
Samsung NP550P5C Guías Del Usuario Manual preview
NP550P5C
Brand: Samsung Pages: 142
Razer RZ09-0196 User Manual preview
RZ09-0196
Brand: Razer Pages: 18
iBall Excelance Manual preview
Excelance
Brand: iBall Pages: 18
Acer TravelMate 4150 Service Manual preview
TravelMate 4150
Brand: Acer Pages: 127
Acer 4720-4721 - Aspire User Manual preview
4720-4721 - Aspire
Brand: Acer Pages: 113
Acer 4720 6011 - TravelMate User Manual preview
4720 6011 - TravelMate
Brand: Acer Pages: 101
Acer 2000 Series User Manual preview
2000 Series
Brand: Acer Pages: 98
Acer 1350 series User Manual preview
1350 series
Brand: Acer Pages: 104
Acer 1410 2039 - Aspire (French) Manuel D'Utilisation preview
1410 2039 - Aspire
Brand: Acer Pages: 104
Acer 1410 2039 - Aspire Service Manual preview
1410 2039 - Aspire
Brand: Acer Pages: 129
Acer 1300 series User Manual preview
1300 series
Brand: Acer Pages: 96
Acer 4740G series Service Manual preview
4740G series
Brand: Acer Pages: 218
Acer 5515 5879 - Aspire - Athlon 1.6 GHz Service Manual preview
5515 5879 - Aspire - Athlon 1.6 GHz
Brand: Acer Pages: 177
Acer 4672WLMi - TravelMate - Core Duo 1.66 GHz User Manual preview
4672WLMi - TravelMate - Core Duo 1.66 GHz
Brand: Acer Pages: 62
Acer 2200 Series User Manual preview
2200 Series
Brand: Acer Pages: 105

Brands by name

Popular brands

Load more brands