manualshive.com logo in svg

HP Compaq nc6220, Maintenance And Service Manual

The HP Compaq nc6220 Maintenance And Service Manual is essential for anyone looking to maintain or troubleshoot their device. This comprehensive manual is available for free download from manualshive.com, providing detailed instructions and guidelines to ensure optimal performance and efficient maintenance of the HP Compaq nc6220.

Share
Download
background image

5–2

Maintenance and Service Guide

Removal and Replacement Preliminaries

5.2 Service Considerations

The following sections include some of the considerations 
that you should keep in mind during disassembly and assembly 
procedures.

✎

As you remove each subassembly from the computer, place 
the subassembly (and all accompanying screws) away from 
the work area to prevent damage.

Plastic Parts

Using excessive force during disassembly and reassembly can 
damage plastic parts. Use care when handling the plastic parts. 
Apply pressure only at the points designated in the maintenance 
instructions.

Cables and Connectors

Ä

CAUTION: 

When servicing the computer, ensure that cables are 

placed in their proper locations during the reassembly process. 
Improper cable placement can damage the computer.

Cables must be handled with extreme care to avoid damage. 
Apply only the tension required to unseat or seat the cables 
during removal and insertion. Handle cables by the connector 
whenever possible. In all cases, avoid bending, twisting, or 
tearing cables. Ensure that cables are routed in such a way that 
they cannot be caught or snagged by parts being removed or 
replaced. Handle flex cables with extreme care; these cables 
tear easily.

Summary of Contents for Compaq nc6220






































































































































































































































Reviews:

No comments

Related manuals for Compaq nc6220

UMAX Technologies VisionBook 12Wa Manual preview
VisionBook 12Wa
Brand: UMAX Technologies Pages: 34
Packard Bell EasyNote BG35 Quick Start & Troubleshooting Manual preview
EasyNote BG35
Brand: Packard Bell Pages: 56
Rugged Computing ATLAS slim 14 Assembly Manual preview
ATLAS slim 14
Brand: Rugged Computing Pages: 43
Oregon Scientific B-Book Learning Laptop Instruction preview
B-Book Learning Laptop
Brand: Oregon Scientific Pages: 28
Acer A315-58-57G3 User Manual preview
A315-58-57G3
Brand: Acer Pages: 73
Dell :atitude 3550 Owner'S Manual preview
:atitude 3550
Brand: Dell Pages: 57
Dell 1720 - Vostro - Core 2 Duo 2.2 GHz User Manual preview
1720 - Vostro - Core 2 Duo 2.2 GHz
Brand: Dell Pages: 88
Toshiba A55-S1066 Specifications preview
A55-S1066
Brand: Toshiba Pages: 10
Belkin F8E550ea Quick Start Manual preview
F8E550ea
Brand: Belkin Pages: 3
Bakker Elkhuizen Ergo-Q 160 Manual preview
Ergo-Q 160
Brand: Bakker Elkhuizen Pages: 5
Bakker Elkhuizen FlexTop 170 Manual preview
FlexTop 170
Brand: Bakker Elkhuizen Pages: 5
Viglen Dossier XT User Manual preview
Dossier XT
Brand: Viglen Pages: 172
Odys EliteWin 360 Manual preview
EliteWin 360
Brand: Odys Pages: 46
Macrovision Corporation M270S viperM User Manual preview
M270S viperM
Brand: Macrovision Corporation Pages: 183
Targus Notebook Expansion USB home dock with audio... User Manual preview
Notebook Expansion USB home dock with audio...
Brand: Targus Pages: 16
Olivetti Olibook S1300 Quick Reference Manual preview
Olibook S1300
Brand: Olivetti Pages: 18
Acer 2450 Guía Del Usuario preview
2450
Brand: Acer Pages: 89
IBM THINKPAD S05L-1270-01 User Manual preview
THINKPAD S05L-1270-01
Brand: IBM Pages: 716

Brands by name

Popular brands

Load more brands