HP Compaq Mini 110 Page 19 Maintenance And Service Manual Download

Page: 19 / 108

Component

Description

(6)

USB port

Connects an optional USB device.

(7)

Audio-out (headphone) jack/Audio-in (microphone)
jack

Produces sound when connected to optional powered
stereo speakers, headphones, earbuds, a headset, or
television audio. Also connects an optional headset
microphone.

WARNING!

To reduce the risk of personal injury,

adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety
information, refer to the

Regulatory, Safety and

Environmental Notices

NOTE:

When a device is connected to the jack, the

computer speakers are disabled.

NOTE:

The audio component must have a 4-

conductor connector.

Left-side components

Summary of Contents for Compaq Mini 110













































































































Search results

Summary of Contents for Compaq Mini 110

Reviews:

Related manuals for Compaq Mini 110

Brands by name

Popular brands

HP Compaq Mini 110, Maintenance And Service Manual

Search results

Summary of Contents for Compaq Mini 110

Reviews:

Related manuals for Compaq Mini 110

Brands by name

Popular brands