35–2
Administrators Guide
FTP Pull Firmware Upgrades
The following table describes the functions found on this
properties sheet.
Table 35–1:
Upgrade Properties Sheet
Function
Description
Local Firmware
Upgrade
Use this group box to upgrade your terminal's firmware
using an FTP server. The functions are:
Use FTP Information from DHCP Server
Select this function if you want to get the FTP server and
directory information from a DHCP server. Click on this
radio button to select the function. By default the function
is disabled.
Use Local FTP Information
Select this function if you want to enter the FTP server
you will use for the upgrade. Click on the radio button to
select the function. By default the function is enabled.
Server Name
Enter the name or IP address of the FTP server where
the binary and params.ini reside. The default is blank.
Server Directory
Enter the directory on the FTP server where the binary
and params.ini reside. The default is blank.
User ID
Enter your user account in this field. The default is
anonymous.
Password
Enter your password in this field. The default is
*****
.
250091-001.book Page 2 Friday, July 13, 2001 9:26 AM