13–2
Administrators Guide
Dial-Up TCP/IP Settings and Security
The following table discusses the functions in this dialog box.
Using the Security Settings Dialog Box
Click on the
Security...
command button in the second dialog box
of the
Dial-Up Configuration Wizard
to configure dial-up
security. When this command button is pressed, the
Security
Settings
dialog box displays. Figure 13–1 shows this dialog box.
Table 13–1:
TCP/IP Settings Dialog Box
Function
Description
Use Software
Compression
Click on this check box to enable this function.
By default, this function is activated and
enabled.
Use IP Header
Compression
Click on this check box to enable
Use IP
Header Compression.
By default, this
function is activated and enabled.
Use SLIP
Click on this check box to enable this function.
SLIP is Serial Line Internet Protocol. By
default, this function is not enabled.
Use Assigned IP Address
Click here to activate this text box. By default,
the text entry box is not activated.
Use Server-Assigned IP
Addresses
Click here to disable server-assigned
addresses and to activate the text entry boxes
for typing-in addresses. By default, the check
box is checked and the text entry boxes are
not activated.
Use Default Gateway on
Remote Network
Click on this check box to enable this function.
By default, the function is activated and
enabled.
250091-001.book Page 2 Friday, July 13, 2001 9:26 AM